7 Extrusion Presses

TYPE	1×1400 T	3×1600 T	2×2000 T	1×2800 T
Weight
Minimum weight / m	60 gr/m	60 gr/m	500 gr/m	500 gr/m
Maximum weight / m	750 gr/m	750 gr/m	2500 gr/m	3500 gr/m
Diameter circumscribed profile
Tubular profiles	120 mm	120 mm	180 mm	230 mm
Flat profiles	140 mm	140 mm	210 mm	330 mm
Length of cut
Minimum	3 m	3 m	3 m	3 m
Maximum	8 m	8 m	15 m	15 m
Standard	6 m	6 m	6 m	6 m
Aloys
Type	6060, 6063, 6463, 6005	6060, 6063, 6463, 6005	6060, 6063, 6463, 6005, 6082, 6106	6060, 6063, 6463, 6005, 6082, 6106
Minimum order
	500 – 750 kg	500 – 750 kg	1000 – 1500 kg	1000 – 1500 kg

Minimum Thickness Table

Minimum circumscribed diameter	EN-AW 6060 EN-AW 6063	EN-AW 6005	EN-AW 6082
Tubular profiles
≤ 100	1	1,5	1,8
≤ 200	1,8	2	2,2
≤ 300	2,2	2,5	3
≤ 400	2,6	3	3,5
Flat profiles
≤ 100	1,2	1,5	3
≤ 200	1,6	2,2	3,5
≤ 300	2,4	2,8	4
≤ 400	3,2	3,5	4,5

General Characteristics

Maximum extruded profile length	13 m
Maximum circumscribed diameter	230 mm
Minimum circumscribed diameter	20 mm
Maximum profile weight	20 kg/m
Minimum profie weight	100 g/m
Alloys	6000 (Al+Mg+Si) – 7000

3 Anodizing Facilities

Facility Type	3 x 80.000 A
Maximum profile length	8000 mm
Colors	13 colors: natural, inox, ivory, bronze, gold, champagne, black, bordeaux, cooper, blue, green, acier & grey.
Mechanic treatments	Light emery, hard emery, bright polished, polished, repolished
Classes of anodic protection	Class 5: 5-9 microns Class 10: 10-14 microns Class 15: 15-19 microns Class 20: 20-24 microns Class 25: 25-29 microns

3 Thermal Brake Lines Assemblies

Type of assembly	Standard, horizontal and vertical polyamide assembly in the same profileı
Maximum height polyamide	52 mm
Maximum profile length	10.000 mm
Minimum profile length	490 mm

Alloys Table

			Mechanical properties
Alloy	Alloy type	Tempering	Proff Stress (Mpa)	Tensile strength (Mpa)	Elongation (%)
1050	Al		60	23	25
6005	AlSiMg(A)	T4 T6	90 200-225	180 250-270	15 8
6060	AlMgSi	T4 T5 T6 T64 T66	60 100-120 140-150 120 150-160	120 140-160 170-190 180 195-215	16 8 8 12 8
6063	AlMg0.75Si	T4 T5 T6 T64 T66	65 110-130 160-170 120 180-200	65 160-175 195-215 180 225-245	14 8 8 12 8
6082	AlSiMgMn	T4 T5 T6	110 230 250-260	205 270 290-310	14 8 8-10
6106	AlMgSiMn	T6	200	250	6-8
6463	AlMg0.75Si	T4 T5 T6	75 110 160	125 150 195	14 8 10

3 Powder Coating Facilities

Facility type
Wood effect
Maximum length in horizontal line	8000 mm
Maximum length in vertical line	7500 mm
Powder coating types	RAL colors NCS colors Antibacterials Textures-Metallic Wood effect

3 Axis, 5 Axes CNCs

Useful length	11.000 mm
Useful width	410 mm
Axle stroke angle	+90º or -90º
Types of machining	Precision cutting Tridimensional cutting Edge removed process Milling: Radial and Peripheral Louvres punched Drilled Threaded Punched
Precision cutting	Precision cuts at any type of angle required Cutting tolerances up to + – 0.2 mm